Quick picks
Bosch GWS8-45
Consider for: Buyers needing a documented grinding setup rather than a cut-off tool
Main limitation: Manual marks metal cutting unsupported; no FindItWise grinding test
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Read product details ↓DeWalt DCG413B
Consider for: Buyers investigating a cordless grinder with documented electronic shutdown features
Main limitation: Battery/charger required; correct guard and accessory must be established for each operation
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Read product details ↓Compare the documented specifications
| What matters | Bosch GWS8-45 | DeWalt DCG413B |
|---|---|---|
| Best for | Buyers needing a documented grinding setup rather than a cut-off tool | Buyers investigating a cordless grinder with documented electronic shutdown features |
| Wheel diameter | 4-1/2 inch | Not verified |
| Input | 7.5 amp | Not verified |
| No-load speed | 11,000 RPM | Not verified |
| Power system | Not verified | 20V MAX battery |
| Control | Not verified | Paddle switch with lock-off lever |
| Amazon | View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab) | View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab) |
Settle the operation before choosing a power source
Bosch GWS8-45 and DeWalt DCG413B illustrate corded and cordless grinder ownership. They are not interchangeable just because both are angle grinders. Establish the exact operation you need first, then investigate how the documented power and equipment arrangements support it.
Our corded grinder shortlist introduces other configurations. Here the decision is whether either of these exact models meets the application requirement and whether you can supply its complete power setup.
The Bosch application limit is decisive for cutting
The GWS8-45 manual supports Type 27 metal grinding but marks metal cutting unsupported. If metal cutting is essential, that excludes this example regardless of whether a corded supply is convenient. Do not treat a similar-looking wheel or a matching spindle thread as permission to override the application table.
The Bosch product record documents a 7.5-amp corded model. That electrical input figure is not a measurement of material removal or a number that can be directly ranked against battery voltage. Verify the appropriate supply and full instructions for the intended work location.
The DeWalt manual separates operations and attachments
The DCG413 instructions describe grinding, sanding, wire-brushing and cut-off applications, with corresponding accessory and guard requirements. Do not assume a tool-only offer supplies every component needed for every listed operation. Review the exact application and applicable equipment together.
The selected DCG413B retailer configuration is tool only. Include compatible battery and charging equipment in the purchase plan. An existing cordless-tool collection is a reason to check compatibility, not evidence that arbitrary batteries or cross-brand adapters are appropriate.
Compare the documented controls without assigning a safety score
Bosch documents a slide switch with a lock-on position. DeWalt documents a paddle switch with a lock-off lever and electronic shutdown features. These are meaningful differences to review in the complete instructions, but they are not FindItWise test results for control, stopping distance or injury prevention.
Do not infer that either power source makes the correct guard, secure work setup or protective equipment unnecessary. Electronic protection descriptions also do not prove a tool can tolerate an unsupported operation. No timed brake test or cutting comparison was performed for this article.
Budget the equipment rather than the bare tool alone
Write a separate equipment list for each candidate: required supply or battery system, correct accessory, guard, mounting parts and any other essential application equipment. Establish what the selected retailer package actually contains before making a total-purchase comparison.
Our grinder compatibility guide explains why wheel dimensions, speed rating and mounting remain separate checks. Those requirements cannot be replaced by a convenient power arrangement.
Both exact models have independently inspected US and Canadian listing identities. Confirm the current offer before ordering; no stock, runtime or tested-performance promise is supplied.
Bosch · Model GWS8-45
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
Bosch GWS8-45
Corded four-and-a-half-inch grinder; manual excludes metal cutting.
| Wheel diameter | 4-1/2 inch |
|---|---|
| Input | 7.5 amp |
| No-load speed | 11,000 RPM |
Reasons to consider
- Exact manufacturer documentation available
Trade-offs
- Manual marks metal cutting unsupported; no FindItWise grinding test
Specifications: Bosch GWS8-45 specificationsBosch GWS8-45 operating instructionsMakita 9557PBX1 exact kitDeWalt DWE402 family instruction manual · Checked 2026-10-29
DeWalt · Model DCG413B
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
DeWalt DCG413B
Cordless paddle-switch angle grinder, selected retailer configuration is tool only.
| Power system | 20V MAX battery |
|---|---|
| Control | Paddle switch with lock-off lever |
Reasons to consider
- Paddle switch and electronic protection descriptions documented
Trade-offs
- Battery/charger required; correct guard and accessory must be established for each operation
Specifications: Bosch GWS8-45 operating instructionsBosch GWS8-45 specification recordDeWalt DCG413 operating instructions · Checked 2026-11-03
Sources & references
- Bosch GWS8-45 operating instructions — accessed November 3, 2026
- Bosch GWS8-45 specification record — accessed November 3, 2026
- DeWalt DCG413 operating instructions — accessed November 3, 2026