Quick picks
Milwaukee 2621-20
Consider for: Buyers planning an M18 reciprocating-saw setup with suitable blades
Main limitation: No FindItWise hands-on performance or durability measurements
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Read product details ↓Milwaukee 2625-20
Consider for: Buyers investigating the documented one-handed layout
Main limitation: Battery and charger requirements must be checked; no cutting-speed test
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Read product details ↓Compare the documented specifications
| What matters | Milwaukee 2621-20 | Milwaukee 2625-20 |
|---|---|---|
| Best for | Buyers planning an M18 reciprocating-saw setup with suitable blades | Buyers investigating the documented one-handed layout |
| Battery system | M18 | M18 |
| No-load strokes | 0–3,000 SPM | Not verified |
| Stroke length | 1-1/8 inch | 3/4 inch |
| No-load stroke rate | Not verified | 0–3,000 SPM |
| Amazon | View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab) | View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab) |
Compare two exact M18 configurations
The Milwaukee 2625-20 HACKZALL and 2621-20 SAWZALL share a battery-system name, but they are different purchase investigations. Start with the access and handling arrangement required for the intended cut. Do not assume that a common platform means common dimensions, controls or package contents.
This comparison focuses on the documented layout and motion specifications. The broader reciprocating-saw shortlist includes a corded alternative. Here the question is narrower: which of these two M18 configurations should you examine for the work you actually need to perform?
What the one-handed design establishes
Milwaukee describes 2625-20 as a one-handed-design HACKZALL and lists a 3/4-inch stroke. Those descriptions make it relevant when you want to investigate that compact arrangement. They do not establish a measured handling advantage for every location or operator.
Do not interpret the product name as an instruction to hold an unsecured workpiece with the other hand. Application and support requirements remain separate checks in the full instructions. We are comparing product configurations, not supplying an alternative operating procedure based on a name or marketing photograph.
What the SAWZALL specification establishes
The 2621-20 product page identifies the SAWZALL configuration. Its operator manual lists a 1-1/8-inch stroke and 0–3,000 no-load strokes per minute. Read those as separate motion measurements rather than a promise that a particular blade completes a cut in a specified time.
For a buyer, the important step is matching the actual job and intended blade to the model instructions. A longer listed stroke does not supply FindItWise with cutting-force, vibration or endurance measurements. We have not run either model through a comparative material test.
Keep blade and package checks independent
Both product pages describe QUIK-LOK blade clamps. That common mechanism name is not enough to settle every accessory or application question. Establish the exact blade connection, material suitability and working reach from the relevant instructions before counting existing blades as part of the purchase.
The selected US offers identify bare tools. Write down the compatible battery and charger you already own, or put the required equipment on the shopping list. A battery-system label on a listing does not tell you what arrives in the selected package or what an unrelated seller has bundled with it.
Choose the requirement that rules a model in
Investigate the HACKZALL if the documented one-handed arrangement is your reason for narrowing the search. Investigate the SAWZALL configuration if that is the form you intend to use after reviewing the work requirements. Leave personal comfort and comparative cutting speed open until you have appropriate evidence.
Read the 2621-20 ownership analysis for its blade and power checks. Both exact US identities were inspected; unresolved Canadian candidates remain unknown. Confirm the offer before ordering, without treating listing identity as a stock or seller-authenticity guarantee.
Milwaukee · Model 2621-20
View on Amazon.com (opens in a new tab)View on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
Milwaukee 2621-20
M18 cordless reciprocating saw; selected offer is bare tool.
| Battery system | M18 |
|---|---|
| No-load strokes | 0–3,000 SPM |
| Stroke length | 1-1/8 inch |
Reasons to consider
- Exact manufacturer specifications and instructions available
Trade-offs
- No FindItWise hands-on performance or durability measurements
Specifications: Milwaukee 2621-20 exact product and packageMilwaukee 2621-20 operator manual · Checked 2026-10-27
Milwaukee · Model 2625-20
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
Milwaukee 2625-20
M18 HACKZALL one-handed-design reciprocating saw; selected offer is bare tool.
| Battery system | M18 |
|---|---|
| Stroke length | 3/4 inch |
| No-load stroke rate | 0–3,000 SPM |
Reasons to consider
- Exact-model manufacturer documentation available
Trade-offs
- Battery and charger requirements must be checked; no cutting-speed test
Specifications: Milwaukee 2625-20 exact HACKZALL modelMilwaukee 2621-20 exact SAWZALL modelMilwaukee 2621-20 operator manualMakita JR3051T specifications and supplied blades · Checked 2026-10-28
Sources & references
- Milwaukee 2625-20 exact HACKZALL model — accessed October 28, 2026
- Milwaukee 2621-20 exact SAWZALL model — accessed October 28, 2026
- Milwaukee 2621-20 operator manual — accessed October 28, 2026