Quick picks
SKILSAW SPT67WL-01 Sidewinder Circular Saw
Consider for: Buyers comparing the listed carrying weight and Sidewinder layout
Main limitation: No FindItWise cutting, fatigue or service-life test
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Read product details ↓Makita XSS02Z 18V LXT Circular Saw, Tool Only
Consider for: Buyers planning a cordless setup with documented compatible Makita batteries
Main limitation: Battery and charger excluded; no FindItWise runtime or cutting test
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Read product details ↓Compare the documented specifications
| What matters | SKILSAW SPT67WL-01 Sidewinder Circular Saw | Makita XSS02Z 18V LXT Circular Saw, Tool Only |
|---|---|---|
| Best for | Buyers comparing the listed carrying weight and Sidewinder layout | Buyers planning a cordless setup with documented compatible Makita batteries |
| Blade | 7-1/4 inch | Not verified |
| Listed weight | 8.6 lb | Not verified |
| Blade diameter | Not verified | 6-1/2 inch |
| Capacity at 90 degrees | Not verified | 2-1/4 inch |
| Capacity at 45 degrees | Not verified | 1-9/16 inch |
| Amazon | View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab) | View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab) |
Write the required cut before choosing a diameter
Makita XSS02Z and SKILSAW SPT67WL-01 offer two concrete saw configurations to investigate when comparing six-and-a-half and seven-and-a-quarter-inch equipment. Start with the actual stock thickness, cut angle and required blade application. The saw has to satisfy that complete row of requirements.
Our circular-saw specification guide separates blade fit from cutting depth. This comparison focuses on the purchase questions raised by these two different blade systems.
XSS02 has angle-specific depth figures
The Makita XSS01/XSS02 instructions identify a six-and-a-half-inch blade. The shared specification table lists maximum depth as 2-1/4 inches at 90 degrees,1-9/16 inches at 45 degrees and 1-7/16 inches at 50 degrees.
Match the required angle with the corresponding capacity entry. If the work sits near a limit, resolve the full setup against the manual before choosing the saw. Keep the exact workpiece measurement beside the table rather than relying on a nominal lumber label.
The XSS02Z offer is the bare-tool configuration in our existing product record. Confirm the required battery and charger separately when comparing a complete purchase. Additional blades and collection equipment should also remain visible in the equipment list.
SPT67WL-01 uses a different blade class
The SKILSAW record identifies a seven-and-a-quarter-inch Sidewinder saw and 15-amp input. Investigate it when the intended work and power arrangement suit that exact configuration. Obtain the applicable angle-specific capacity from the complete model instructions before deciding that the blade diameter answers the cut requirement.
Use the supported blade diameter and fitting arrangement for the actual saw. Existing blade stock should be checked against the complete requirements before it becomes a reason to choose either model. A nominally larger cutting disc cannot simply be treated as an upgrade for the other saw.
Compare consumables as part of ownership
For each candidate, list the blade required for the intended material, its diameter and mounting requirements. Then check which blade is supplied with the exact offer and what remains to obtain. This can reveal a missing accessory that a tool-only price comparison would overlook.
The circular-saw dust connection guide covers the separate nozzle, hose and package checks. Resolve the collection arrangement for the exact saw instead of transferring another model’s accessory number.
Finish with a complete purchase record
Record the stock thickness, angle, supported blade and power equipment on the same worksheet. Choose the configuration whose documentation addresses those needs. Handle comfort, cut quality and project completion time require further evidence for the actual work.
Both models reuse existing verified US listings with their original dates. Their Canadian records remain unknown. Inspect the current seller offer before ordering so that the equipment and included items match the setup you have evaluated.
The SKIL specification table identifies the blade location as right. Include the actual control and viewing arrangement in your assessment, especially if you are replacing a tool whose layout you already know.
SKIL · Model SPT67WL-01
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
SKILSAW SPT67WL-01 Sidewinder Circular Saw
Documented Sidewinder model with a magnesium foot.
| Blade | 7-1/4 inch |
|---|---|
| Listed weight | 8.6 lb |
Reasons to consider
- Manufacturer documents the listed features and package
Trade-offs
- No FindItWise cutting, fatigue or service-life test
Specifications: SKIL 5280-01 specifications and packageSKIL SPT67WL-01 specifications and packageSKIL SPT77WML-01 specifications and packageSKIL SPT77 series operating manual · Checked 2026-10-22
Makita · Model XSS02Z
View on Amazon.com (opens in a new tab)Search on Amazon.ca (opens in a new tab)Confirm the seller’s included items before purchasing.
Makita XSS02Z 18V LXT Circular Saw, Tool Only
Cordless 6-1/2-inch model; battery and charger excluded.
| Blade diameter | 6-1/2 inch |
|---|---|
| Capacity at 90 degrees | 2-1/4 inch |
| Capacity at 45 degrees | 1-9/16 inch |
Reasons to consider
- Manufacturer documents included blade and cutting capacities
Trade-offs
- Battery and charger excluded; no FindItWise runtime or cutting test
Specifications: SKIL 5280-01 corded circular-saw specifications and packageMakita XSS02Z cordless tool-only specifications and packageMakita XSS01/XSS02 operating manual · Checked 2026-10-27
Sources & references
- MakitaXSS01/XSS02 manufacturer documentation — accessed November 8, 2026
- SKILSAWSPT67WL-01 manufacturer documentation — accessed November 8, 2026