AT A GLANCE

Quick picks

Makita 9403

Consider for: Buyers matching 4 x24inch belts and the recorded speed arrangement to their work

Main limitation: No FindItWise removal-rate, comfort or finish test

View on Amazon.com (opens in a new tab)Read product details ↓

Makita 9903

Consider for: Buyers matching 3 x21inch belts and the recorded speed arrangement to their work

Main limitation: No FindItWise removal-rate, comfort or finish test

View on Amazon.com (opens in a new tab)Read product details ↓

Makita 9404

Consider for: Buyers matching 4 x24inch belts and the recorded speed arrangement to their work

Main limitation: No FindItWise removal-rate, comfort or finish test

View on Amazon.com (opens in a new tab)Read product details ↓

Compare the documented specifications

Compare the options
What mattersMakita 9403Makita 9903Makita 9404
Best forBuyers matching 4 x24inch belts and the recorded speed arrangement to their workBuyers matching 3 x21inch belts and the recorded speed arrangement to their workBuyers matching 4 x24inch belts and the recorded speed arrangement to their work
Belt size4 x 24 inch3 x 21 inch4 x 24 inch
Belt speed1,640 ft/min690–1,440 ft/min690–1,440 ft/min
AmazonView on Amazon.com (opens in a new tab)View on Amazon.com (opens in a new tab)View on Amazon.com (opens in a new tab)

Choose the abrasive format and speed arrangement

Makita 9403, 9903 and 9404 provide three concrete belt-sander configurations to compare. Start with the surface you intend to work and the abrasive format you will need to keep in stock. Then decide whether the documented speed-control arrangement answers a requirement for that work.

Our woodworking tool-selection guide helps identify the missing operation in a project. This shortlist concerns the belt format after you have established that a supported belt-sanding process is appropriate.

9403 combines a four-inch belt with fixed speed

The 9403 manufacturer record specifies four-by-24-inch belts and a belt speed of 1,640 feet per minute. It explicitly lists no variable-speed dial. Investigate this configuration when that abrasive format and speed arrangement meet the intended process.

Keep both belt dimensions on the consumable order. Four inches describes width, while 24 inches describes the specified belt length. A width match alone leaves the order incomplete. The manufacturer lists an 80-grit belt and dust bag, so plan any other abrasives required by the work separately.

9903 uses a narrower and shorter belt

The 9903 record specifies three-by-21-inch belts and a variable range of 690–1,440 feet per minute. Consider this arrangement when you deliberately want that belt format and a speed dial to assess against the application’s instructions.

A belt supplied for 9403 cannot be assumed to fit 9903. Write the complete size beside each machine if you maintain more than one type. Also confirm the exact offer before counting on a supplied abrasive or bag, especially when changing sellers or package variants.

9404 retains the wider format with variable control

The 9404 record combines four-by-24-inch belts with a variable 690–1,440 feet-per-minute range. It is the configuration to investigate when those dimensions and adjustable speed are both requirements.

The shared nominal belt size with 9403 does not settle every abrasive choice. Check the abrasive manufacturer’s material and grade guidance alongside the tool instructions. The sanding-disc selection guide explains why the surface and process stage belong in the purchase notes, although its disc fittings do not establish belt fit.

Build the complete consumable list

Record the tool model, belt width, belt length, abrasive product and required grades on one line. Next, list collection equipment and any other manufacturer-specified accessories. Compare the selected retailer package with that list to identify what remains to obtain.

The specifications support comparing configurations. They leave actual removal rate, achieved surface quality and handling with your workpiece as questions requiring further evidence. Avoid choosing solely from the largest belt or highest listed travel rate.

Exact US product titles and selected ASINs were inspected for all three models. The Canadian 9404 model number was verified in its product table. Canadian 9403 and 9903 candidates could not be identified from readable product details and remain unknown. Check current package details when ordering.

Record belt travel in feet per minute alongside the abrasive dimensions. Keep that linear-speed unit visible when comparing a belt specification with the rotational-speed labels used on other tool categories.

Before choosing a kit, check the exact model number, compatible battery and charger, and the seller’s included items.
Check the exact kit and its included items before purchasing.
RESEARCH-BASED PRODUCT PROFILEBuyers matching 4 x24inch belts and the recorded speed arrangement to their work

Makita 9403

Corded belt sander with documented abrasive dimensions and speed specification.

Product information
Belt size4 x 24 inch
Belt speed1,640 ft/min

Reasons to consider

  • Manufacturer identifies exact abrasive and speed configuration

Trade-offs

  • No FindItWise removal-rate, comfort or finish test

Specifications: Makita 9403 manufacturer documentationMakita9903 manufacturer documentationMakita 9404 manufacturer documentation · Checked 2026-11-08

RESEARCH-BASED PRODUCT PROFILEBuyers matching 3 x21inch belts and the recorded speed arrangement to their work

Makita 9903

Corded belt sander with documented abrasive dimensions and speed specification.

Product information
Belt size3 x 21 inch
Belt speed690–1,440 ft/min

Reasons to consider

  • Manufacturer identifies exact abrasive and speed configuration

Trade-offs

  • No FindItWise removal-rate, comfort or finish test

Specifications: Makita 9403 manufacturer documentationMakita9903 manufacturer documentationMakita 9404 manufacturer documentation · Checked 2026-11-08

RESEARCH-BASED PRODUCT PROFILEBuyers matching 4 x24inch belts and the recorded speed arrangement to their work

Makita 9404

Corded belt sander with documented abrasive dimensions and speed specification.

Product information
Belt size4 x 24 inch
Belt speed690–1,440 ft/min

Reasons to consider

  • Manufacturer identifies exact abrasive and speed configuration

Trade-offs

  • No FindItWise removal-rate, comfort or finish test

Specifications: Makita 9403 manufacturer documentationMakita9903 manufacturer documentationMakita 9404 manufacturer documentation · Checked 2026-11-08

Sources & references

Explore the purchase options

Open a verified listing in your selected marketplace. Confirm the exact kit, included items, and seller terms on Amazon.

As an Amazon Associate, we earn from qualifying purchases.